1

TOPAS® 6013M-07

Cyclic Olefin Copolymer
Topas Advanced Polymers, Inc.
产品说明：
Product Description
TOPAS 6013M-07 is an injection molding grade with a wide processing window, especially suited for blow molding processes including IBM and ISBM. It is a glass-clear amorphous polymer with outstanding moisture barrier, chemical resistance, high purity and a non-reactive surface making it an excellent choice for healthcare and other high-tech products. Lower leachables and extractables of TOPAS COC preserve content stability and quality. It is a non-polar substrate that does not promote adsorption, denaturation, aggregation, or precipitation like glass can. This grade has a high (130°C) heat distortion temperature to withstand 121°C steam sterilization protocols, as well as gamma and EtO procedures.

Selected Applications

• Drug delivery

• Prefilled syringes, vials, cartridges

• Bottles and tubes

• Surgical instruments

• IV containers and components

• Labware

• Optics

• Electronics

• Food packaging

• Healthcare and food contact

Leading Attributes

• Low leachables & extractables, low water transmission

• Non-ionic, does not promote adsorption like glass

• Minimally reactive

• Chemically resistant to alcohol, acetone, and acrylates

• Transparent, withstands EtO/gamma/steam sterilization

• Temperature resistance, clarity and purity

• Clarity, low birefringence, low moisture sensitivity

• Low dielectric constant, thermoplastic

• Not manufactured with BPA, phthalates, or halogens

• Broad regulatory compliance

Related Grades for Injection Molding, Healthcare, Optics and Diagnostics

• TOPAS 6013S-04 - standard processing version with standard flow

• TOPAS 6015S-04 - higher heat distortion temperature (150°C) for 134°C protocols

• TOPAS 6017S-04 - our most heat distortion resistant IM grade (HDT=170°C)

• TOPAS 5013L-10 - high flow grade; lubricated version for greater processing versatility

• TOPAS 5013S-04 - high flow grade without lubricant

• TOPAS IT X1 - impact grade for applications requiring extra toughness

物性信息：

基本信息
特性	纯度高 低萃取物 防潮 辐射消毒 共聚物 环氧乙烷消毒 耐化学性良好 耐酒精 耐热性，高 清晰度，高 食品接触的合规性 无 BPA 无定形的 无卤 用蒸汽消毒
用途	吹塑成型应用 电气/电子应用领域 管件 光学应用 瓶子 实验室器具 食品包装 外科器械 药品包装 医疗/护理用品
机构评级	DMF 12132 FDA FCN 405 ISO 10993 USP 第VI类 欧洲 10/1/2011 12:00:00 AM
外观	清晰/透明
形式	粒子
加工方法	Injection Stretch Blow Molding 注吹成型 注射成型

物理性能	额定值	单位制	测试方法
密度	1.02	g/cm³	ISO 1183
熔流率（熔体流动速率） (260°C/2.16 kg)	12	g/10 min	ISO 1133
溶化体积流率（MVR） (260°C/2.16 kg)	13.0	cm³/10min	ISO 1133
收缩率 1	0.50 到 0.70	%	内部方法
吸水率 (饱和, 23°C)	0.010	%	ISO 62

机械性能	额定值	单位制	测试方法
拉伸模量	2900	MPa	ISO 527-2/1A/1
拉伸应力 (屈服)	63.0	MPa	ISO 527-2/1A/50
拉伸应变 (屈服)	2.6	%	ISO 527-2/1A/50

冲击性能	额定值	单位制	测试方法
简支梁缺口冲击强度 (23°C)	2.0	kJ/m²	ISO 179/1eA
简支梁无缺口冲击强度 (23°C)	14	kJ/m²	ISO 179/1eU

热性能	额定值	单位制	测试方法
热变形温度 (0.45 MPa, 未退火)	130	°C	ISO 75-2/B
玻璃转化温度	142	°C	ISO 11357-2

光学性能	额定值	单位制	测试方法
折射率	1.530		ISO 489
透射率	91.0	%	ISO 13468-2

注射	额定值	单位制
料筒后部温度	230 到 260	°C
料筒中部温度	240 到 270	°C
料筒前部温度	250 到 280	°C
射嘴温度	240 到 300	°C
加工（熔体）温度	240 到 300	°C
模具温度	95.0 到 125	°C
注塑压力	50.0 到 110	MPa
注射速度	中等偏快
保压	30.0 到 60.0	MPa
背压	< 15.0	MPa
Screw Speed	50 到 200	rpm

注射说明
Feed Temperature: <100°C (<212°F)Max. Residence Time: <15 minutes; short interruption to cycle, reduce Tx = 170°C (338°F)Injection Speed: 50 - 150 mm/sec (2.0 - 6.0 in/sec)Nozzle Type: Free Flow

备注
1 .	Dependent on process conditions and part design.